Modlink
Video Tutorials
Overview
Monolink is a mod that allows connection to any standard monome patch that uses the older (monomeserial) protocol for communication. If you are trying to connect to a newer (serialosc) monome patch, you should either use the MonoLinkComponent. (there will be a new version of the monolink mod that supports serialosc as well, and for owners of m4l, the mod will normally perform better than the CS Scripted version, so I recommend using the mod).
Here's a screenshot of 3 instances of modlink being used, 2 with SerialOSC connections (_xor and polygome), and one with MonomeSerial (molar).
Examples
Here's an example using the older Monolink plugin from b992. This setup is kind of redundant now, since LCC has been ported over to a mod.
Monolink using the BlockMod control surface and Live Clip Chopper:
These are the basic settings for getting the Live Clip Chopper to work with Monolink.
Also, if you are using multiple versions of the Monolink plugin, make sure that each one has its own UDP port settings, otherwise you will get some strange interactions between each instance (e.g. feedback from one on the others grid, etc.).
