header image
 

amounra

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 110 total)
1 2 3 4 5 6 7 8
  • Author
    Posts
  • March 6, 2021 at 6:45 am in reply to: Firmware file question #1012
    amounra
    Participant

    You would need a pict programmer to dump the firmware from that controller, I think….and no idea how to do it. I did it once a long time ago when I repaired my original Ohm64, but it’s been, like, 8 years or something and I had someone from Livid to guide me through it at the time.

    Might be easier in the long run to try to make something like that with MaxMSP or something…..

    a

    March 6, 2021 at 6:41 am in reply to: CNTRL V2 manual #1011
    amounra
    Participant

    Not having any trouble with the wiki….maybe it was just down momentarily?

    http://wiki.lividinstruments.com/wiki/Main_Page#Legacy_Documentation

    February 28, 2021 at 4:06 am in reply to: CTRL:R encoder only sends a value of +1/-1 #1010
    amounra
    Participant

    I’m away from home atm, but there are two different editor links that you can still find via google….one works and one doesn’t. Maybe search for the one that does (sorry I have no way to check at the moment)….I’ll be home next week and I can try to help more then. There’s also an editor app that will work on older OSs but again, I have no access to any resources right now, I’m posting this from my phone ;)

    February 24, 2021 at 11:17 pm in reply to: DS1 script for Live 11 ? #1008
    amounra
    Participant

    Thanks for the heads up..I won’t be able to check until I get back but I’ll try to make it a priority when I do. I’d appreciate knowing about any other weirdness you encounter as well, I haven’t specifically tested the livid scripts much at all, instead only the aumhaa framework in conjunction with other projects im working on currently. Theres a good chance some problems slipped through the cracks in the same way that the blinking issue did. I’ll be back on the 2nd, if you don’t hear from me soon after that then drop me another message please :)

    a

    February 23, 2021 at 10:37 pm in reply to: DS1 script for Live 11 ? #1005
    amounra
    Participant

    Just pushed a new commit, it should fix the flashing problem in most (if not all) controllers.

    February 23, 2021 at 8:19 pm in reply to: DS1 script for Live 11 ? #1004
    amounra
    Participant

    cool, thanks for letting me know….I’ll get to the bottom of it asap, but I’m traveling today so it may be a minute.

    a

    February 23, 2021 at 8:16 am in reply to: CTRL:R encoder only sends a value of +1/-1 #1001
    amounra
    Participant

    Sorry, missed this post and have been really busy.

    Here’s a link to the firmware updater, which I think is what you’re looking for:

    http://www.aumhaa.com/livid_archive/FirmwareUpdater/Livid_Firmware_Update_117_osx.zip

    Does that get you up and running? I’ll be unavailable for the next week-ish, apologize for getting back to you a bit late….

    a

    February 23, 2021 at 8:14 am in reply to: DS1 script for Live 11 ? #1000
    amounra
    Participant

    I just pushed new versions of the scripts for Live11 to m4m8 repository. Let me know if you find issues, I haven’t tested them thoroughly yet. They’re compiling though, and I did some rudimentary testing when the Live11 beta switched over to using Python3. Hopefully things work well, but I’ll be unavailable for the next week or so, so unfortunately probably can’t do much until after that as far as fixing things.

    Cheers :)

    February 16, 2021 at 12:07 am in reply to: CTRL:R encoder only sends a value of +1/-1 #998
    amounra
    Participant

    The date of export is probably the only useful thing, but I don’t know how accurate it will be. The best way to find out is to try both versions of the firmware, see which one works right (either will work, but for one version the encoder direction will be reversed), and then we would know for sure.

    February 13, 2021 at 10:59 pm in reply to: CTRL:R encoder only sends a value of +1/-1 #996
    amounra
    Participant

    There are two types of encoders that were used for CNTRLR. One sends a reversed signal, so it’s important to get the right one. I looked through the forums and my emails and couldn’t find the right information, and unfortunately the ones that I have are for Code, not CNTRLR, so they aren’t necessarily the same.

    Do you have any way of knowing the production date of the CNTRLR you have? Or which firmware was installed? There were two, one for the reversed encoders and one for the regular ones…if you can determine that, I can probably narrow it down for you a bit.

    a

    February 12, 2021 at 1:26 am in reply to: CTRL:R encoder only sends a value of +1/-1 #994
    amounra
    Participant

    Ok, yeah that seems like a bad pot. If it were sending inc/dec it would be different values.

    I’ll look around and see if I can find the right specs for those, I had to replace one on my Code a long time ago, but I got them direct from Livid. Still, I know that the info exists somewhere, because I had it at the time.

    Might be a minute before I get back to you, super busy atm….apologies in advance ;)

    January 30, 2021 at 2:02 am in reply to: CTRL:R encoder only sends a value of +1/-1 #992
    amounra
    Participant

    can you show me a Midi stream coming from it, into say, MIDI Monitor? Just curious exactly what it’s sending…..

    January 28, 2021 at 12:00 am in reply to: CTRL:R encoder only sends a value of +1/-1 #989
    amounra
    Participant

    Hi there bichuelo,

    I don’t think it’s a hardware problem. If its successfully sending +1/-1, then the encoder is physically working, but the firmware has stored the wrong mode for it. It’s more likely a problem with the settings. Are you using it in conjunction with a script at any point? Which encoder is giving you the issue?

    January 25, 2021 at 10:25 am in reply to: Brain v2 Configure #988
    amounra
    Participant

    Hey Nio,

    Cool looking controller!
    I’ve seen that happen before, basically some Max paths are messed up on your machine. I can’t remember if reinstalling will fix it, but I’m sure I have a copy of the Brainv2 configure software somewhere, let me see if I can find it….

    http://www.aumhaa.com/livid_archive/Brain/BrainV2JRConfigure_107.dmg.zip

    That’s version 1.07, which is also the version I have installed on my computer, so you should be good ;) Let me know if you have any trouble….

    I might split this off into another discussion so people can find it more easily.

    a

    January 13, 2021 at 10:14 am in reply to: Elements Alchemist Software Download (MAC) #986
    amounra
    Participant

    You’re welcome to drop me some email, or a direct message via the forums….we can always chat via discord or something if you need help, I don’t know how much I’ll be able to help with the elements stuff though….

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 110 total)
1 2 3 4 5 6 7 8